LeapFrog Creatr-HS Manual page 23

Rotate
As with Translate, grab one of the
circles to interactively rotate about
the chosen axis. Grab the blue circle
to rotate about an axis perpendicular
to the active viewpoint. You can also
change your part selection during
operation.
Use the Enable Snapping checkbox
to move parts in defined increments.
You can specify the step size yourself.
With the Interactive Rotate around
line, you can specify any line on any
part as rotation center
Bottom/Top
The Bottom/Top function allows easy orientation of the selected part by indicating a
plane as the bottom/top plane. This plane will automatically be oriented parallel to the
platform (i.e. the XY-plane).
Click the Indicate Plane button to select you reference plane (the selected plane is indi-
cated in green). The selected plane will be orientated parallel to the platform facing the
upper or bottom (depending on your selection).
TIP: For full description of all the available positioning options, please revert to
the Materialise Creatr Manual
Creating your own printable file: from STL to gcode
21