Technical Specifications; Limited Two-Year Warranty - Lumiscope 1145 User Manual

Problem Symptom Check This Remedy
Cannot find Retake the
No user The memory
memory a record measurement.
was not saved
after taking a
Press or
measurement
to save
the corresponding
user's memory
The record was
Press to
stored to the
view User 1's
wrong user
record. Press
memory
to view
User 2's record

Technical Specifications

Measuring method ............ Oscillometric
Measurement location .........Wrist
Memory ........................ 60 records per user
Maximum number of users ... 2
Dimensions .................. 3.5 x 3.4 x 1.2 inches
(90 x 86 x 30.8 mm)
Weight ........................ 6.3 oz (180g) without
batteries
Cuff circumference ............ 5.3 to 7.7 inches (13.5 to
19.5 cm)
Measuring range:
Pressure ..................... 30 to 280 mmHg (4.0 to
37.3 kPa)
Pulse ........................... 40 to 200 pulse/min
15
Accuracy:
Pressure........................ +/- 3 mmHg
(+/- 0.4 kPa)
Pulse ........................... +/- 5%
Power supply .................. 3V DC, 2 LR03 / AAA /
UM4-size 1.5V batteries
Power save..................... Auto power off after 1
minute of non-activity
Operating environment:
Operation ..................... 50°F to 104°F
(10°C to 40°C)
Storage / Transport ............ -4°F to 140°F
(-20°C to 60°C)
Humidity range ............... 10% to 83% relative
humidity

Limited Two-Year Warranty

Lumiscope guarantees this product free from defects in material and
workmanship for a period of two years from the date of purchase,
except as noted below:
This Lumiscope product warranty does not cover damage caused
by misuse or abuse, the attachment of any unauthorized accessory,
alteration to the product, or any other conditions whatsoever that
are beyond the control of Lumiscope. Lumiscope shall not be
responsible for any type of incidental, consequential, or special
damage. All implied warranties, including, but not limited to those
implied warranties of fitness and merchantability, are limited to the
total duration of two years from the original date of purchase.
To obtain warranty service on your Lumiscope Blood
Pressure Monitor, please contact the Lumiscope Repair Department
at 1-800-672-8293 or visit www.lumiscope.net. There is a $15 fee
for return shipping and handling. Please make checks payable to
The Lumiscope Co., Inc.
Upon receipt, Lumiscope will repair or replace, as appropriate, this
blood pressure monitor and return it to you. Warranty is solely
through the Lumiscope Repair Department. Service of this product
by anyone other than the Lumiscope Repair Department voids
warranty.
In the event that Lumiscope does not abide by the terms of this
warranty, the consumer may seek breach of contract remedies in
the New York State Federal courts of law. This warranty gives you
specific legal rights and you may also have other rights which vary
from state to state.
Some states do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitation may not apply
to you.
16