Subscribe to Our Youtube Channel
Related Manuals for Lumiscope 1103
Summary of Contents for Lumiscope 1103
- Page 1 Blood Pressure Monitor Semi-Automatic Quick-Start Instructions Please read before operating!! Refer to Instruction Manual for Additional Details Model 1103 GF0800048RevB10...
- Page 2 1. Open the battery cover and install four alkaline AA batteries in the battery compartment, ensuring that battery polarity is correct. Close the battery compartment cover. 2. Plug the end of the cuff tubing into the monitor connector as shown at right. 3.
- Page 3 Monitor de Presión Arterial Semi-Automática Instrucciones Rápidas para el uso Por Favor lea antes de usar!! Refiérase al Manual de Instrucciones para Detalles Adicionales Modelo 1103 GF0800048RevB10...
- Page 4 1. Abra el cubierto de la batería e instalar cuatro baterías alcalinas AA en el compartimiento de la batería, asegurando que la polaridad de la batería es correcta. Cierre el cubierto. 2. Conecte el extremo del manguito en el tubo conector de monitor como se muestra a la derecha.
Need help?
Do you have a question about the 1103 and is the answer not in the manual?
Questions and answers
I have the semi-automatic BP monitor , but I cannot connect the inflating bulb/air release valve to the system. I think I am missing the proper air tube and air tube connecter. Please help.
@DONALD GORDON The answer to my problem is not in the manual.
To connect the inflating bulb and air release valve to the Lumiscope 1103 semi-automatic BP monitor:
1. Locate the air hose coming from the cuff.
2. Attach the air hose to the air connector on the main unit.
3. Ensure the inflating bulb and rapid deflation valve are connected to the air hose.
4. Check all connections are secure before starting the measurement.
This answer is automatically generated