Deleting All Records; Troubleshooting - Lumiscope 1145 User Manual

4. If you decide to abort the delete action instead, press
to go back to the main screen.

Deleting All Records

1. Press or to recall the latest measurement
record for User 1 or User 2.
2. Press and hold SET until the LCD shows "dEL ONE".
3. Press to show the option of deleting your entire
measurement history; the LCD displays "DEL ALL".
4. Press SET to delete all measurement records. After
you have confirmed deleting all records, the screen
shows dEL dONe.
5. If you decide to abort the delete action instead, press
once OR press twice to go back to the
main screen.

Troubleshooting

This section includes a list of error messages and
frequently asked questions for problems you may
encounter with your blood pressure monitor. If the
product is not operating as you think it should, check
here before arranging for servicing.
Problem Symptom Check This Remedy
Replace with new
No Display is Batteries are
dim or will batteries
power exhausted
not light up
Insert the
Batteries
batteries correctly
are inserted
incorrectly
Batteries Replace
Low shows
batteries are low with new
on the
display batteries
13
Problem Symptom Check This Remedy
Err shows Relax for a
Error A measure-
message on the moment and then
ment error
measure again
display.
occurred
Err 1, 2, or Refasten the cuff
The wrist cuff
and then measure
3 shows is not secure
again
on the
display
Movement
Err 4 The monitor
shows on can affect the
detected
the display measurement.
motion while
measuring
Relax for a
moment and then
measure again
Relax for a
Err 5 Pressure is
shows on moment and then
over 37.3 kPa
the display measure again
(280 mmHg)
Err 6 Movement
Deflation
shows on can affect the
period was too
measurement.
the display long
Relax for a
moment and then
measure again
Problem Symptom Check This Remedy
Err 7 or 8 Retake the
Error A calibration
message shows on measurement. If the
error occurred
problem persists,
the display
contact the retailer
or our customer
service department
for further
assistance. Refer
to the warranty for
contact information
and return
instructions
Date and Reset the clock
Settings The clock was
are wrong time are
not set or reset
incorrect after installing
new batteries
Reset the
Measure- The
ment unit measurement unit
measurement
(kPa or
unit was not set
mmHg) are or reset after
incorrect installing new
batteries
14