Table of Contents
Advertisement
ASSEMBLY
INSTRUCTIONS
STEP 1
Fit the Front Stabilizer (F) to the Main Frame
(B) and secure it with 2 of M8xPl.25x55L
Carriage Bolts (I-1), 2 Flat Washers (I-2), and
two Nuts (I-3). Make sure they are securely
tightened.
\.J
STEP 2
Fit Pedal Holder (E) to the Main Frame (B)
and secure it with 4 M8xP1.25x20L
Screws
(I-4) and 4 Flat Washers (I-2).
Remarks:
Do
not
screw one
set of the
M8xPl.25x20L
Screws and Flat Washers too
tightly at one time. It is better to fix the four
sets firmly at the same time to allow you to
change angles and to level easily.
Advertisement
Table of Contents
