Advertisement
When using Mac OS X
1
3
Check USB ports
S
Checking operation
S
tep
tep
Check that the mouse vertical scrolling functions are working correctly
Check the USB port on your computer.
in Safari.
Click the Safari icon in the Dock.
USB port
Safari will launch.
Any USB port may be used.
y
This product can be connected to a USB hub. However, it may
y
not work depending on the power supply capability of the USB
hub.
Display your favourite web site in Safari and change the
size of the window so that the vertical scrollbars appear.
2
S
Installing the Receiver Unit
tep
* The sample website used here is the ELECOM homepage.
Activate the Macintosh.
●
Wait until Mac OS X has started up completely.
Insert the receiver unit into a USB port on your Macintosh.
Insert here.
Scroll the wheel back and forth.
USB port
Receiver unit
y
Carefully check the orientation of the connector and the
place where you will connect the receiver unit.
y
If you feel strong resistance when inserting the receiver
The mouse is operating normally
unit, check that the shape and orientation of the
if the screen moves up and down
as you scroll the wheel.
connector is correct. Using excessive force may damage
the connector and cause injury.
In applications that do not support scrolling, the screen will
The mouse driver is installed automatically.
not move when you scroll the wheel.
Troubleshooting
When the product appears to be
malfunctioning
„
„
When the mouse pointer on the screen does not move, or
moves unstably, when the mouse is moved
It is possible that the reflectivity of the surface on which this product
is being used is not suitable for a laser mouse. Use this product on a
mouse pad that is designed for use with laser mice.
When using this product on a metallic surface such as a steel desk,
If Safari is not in the Dock, double-click the
radio wave outreach may be shortened. In such cases, move the
Safari icon in the Applications folder.
receiver unit closer to the mouse until mouse operation stabilises.
It is possible that the receiver unit is not connected correctly to the USB
port. Disconnect the receiver unit from the USB port and reconnect it.
The receiver unit and the mouse body are too far apart or there is a
possibility that the receiver unit is facing in a direction from which it
cannot receive radio signals.
Adjust the position of the receiver
Scrollbar
unit. The operable range of this
product is the area within a circle
with a radius of 10 m from the
receiver unit. Depending on the
usage environment, the mouse
may not operate even when it is
within approximately 10 m of the
receiver unit. In such cases, move
the mouse closer to the receiver
unit until operation stabilises.
Interference may occur if multiple units of this product are used
together or if this product is used with other wireless devices. In this
case, change the channel of other wireless devices.
Scrolling
(Multiple units of this product have an automatic channel avoidance
down
function.)
Scrolling up
If battery level becomes low, mouse operation may become unstable.
Refer to "Charging the mouse" on front page opposite to charge the
battery.
•
If battery level becomes low, the Charging/Remaining battery
level indicator lamp begins flashing green.
Up and down scrolling operation in MAC OS X 10.7 works
* When not using the mouse, turn it off to save battery power.
in reverse from typical models. This can be changed in the
It is possible that the standard Windows mouse driver did not install
mouse settings screen.
correctly and that this product is detected as an unknown device by
Windows®. This product is usually detected as a USB human interface
device. If it is detected as an unknown device, see "Removing an
unknown device, " and after removing the device from Device Manager,
repeat "Step 2 - Installing the Receiver Unit" on the front of this sheet.
If you have installed drivers and settings utilities produced by the original
manufacturer for a previous mouse, uninstall them first. This product may
not operate correctly if a driver made by another company is installed. See
the instruction manual that was supplied with your previous mouse for
uninstall instructions.
It is possible that the driver is conflicting with another driver such
as that for a laptop touch pad. To use this product correctly, you
must delete the touch pad driver. However, if you delete this driver,
you may not be able to use the touch pad or touch pad functions.
Contact the PC manufacturer for more details.
The wheel moves, but the mouse cursor does not
„
„
In certain applications that do not support the scrolling function, the
mouse cursor will not move when you move the wheel.
Removing an unknown device
If the standard Windows mouse driver did not install correctly and this
product is detected as an unknown device, remove the unknown device
from Device Manager, and then repeat "Step 2 - Installing the Receiver Unit"
on the front of this sheet.
If there are multiple unknown devices, before removing a
y
device, check that it is actually this product. Disconnect the
receiver unit and check which unknown device disappears.
The device that disappears is this product.
If the unknown device does not disappear even after you
y
have deleted the driver following the instructions below, it is
possible that there is something wrong with the PC. Contact
the PC manufacturer.
With the product connected to the PC, follow the procedure below to
remove the unknown device.
* Be sure to log on using an administrator account when Windows
starts up.
* Screen display may differ depending on operating system, but the
procedure remains the same.
Display Device Manager.
●
Windows® 7 and Windows Vista®
1. From the [Start] menu, right-click [Computer].
2. Click [Properties].
3. Click [Device Manager].
●
Windows® XP
1. From the [Start] menu, right-click [My Computer].
2. Click [Properties].
3. Click the [Hardware] tab.
4. Click
.
Approximately
10 m
Receiver unit
The Device Manager window appears. Right-click the
unknown device, and click [Uninstall].
Click
.
Disconnect the receiver unit and
restart the PC.
Repeat the procedure from "Step 2 - Installing the Receiver
Unit" on the front of this sheet.
Internal battery troubleshooting
„
„
Charging lamp does not turn on when charging.
Start up the PC if it is not turned on.
If the PC is in stand-by mode, take it out of stand-by.
The PC USB port may not output a sufficient amount of power for
charging. Try disconnecting the product from the USB port that it is
connected to.
Charging takes longer than the specified charging time.
„
„
If the temperature is too high or too low when charging, charging
may not perform correctly. Charge in an environment between 5 and
40°C.
Internal battery only lasts a short time
„
„
If the internal battery can only be used for a short time even when
fully charged, this is the condition of the battery life.
- 2 -
Basic specifications
产品中有毒有害物质或元素的名称及含量
根据中国" 电子信息产品污染控制管理办法"
Product name
Wireless laser mouse
Article No.
M-NE5DL Series
OS
Windows 7 (Includes SP1),
Windows Vista (up to SP2),
部件名称
Windows XP (SP3)
Mac OS X 10.5 to 10.5.8, 10.6 to10.6.8, 10.7 to10.7.1
电路板
Resolution (dpi)
1200
外壳 其他
Interface
USB
○ ： 表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006
Radio frequency
2.4 GHz bandwidth
标准规定的限量要求以下。
Radio wave method
GFSK modulation
× ： 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T
11363-2006 标准规定的限量要求。
Radio wave outreach
Non-magnetic substance (e.g. wooden desk):
Approx. 10 m
Magnetic substance (e.g. metal desk): Approx. 3 m
* Test values in the ELECOM environment
Mouse body dimensions
32.5 (W) x 32.5 (D) x 53.0 (H) mm
Receiver Dimensions
15.0 (W) x 15.07.5 (D) x 6.0 (H) mm
Operating temperature/
5 to 40°C, 90% RH max. (no condensation)
Hereby, ELECOM Co., Ltd., declares that this product is in compliance with
humidity
the essential requirements and other relevant provisions of Directive [2006/95/
Storing temperature/
-10 to 60°C, 90% RH max. (no condensation)
EC].
humidity
Types of batteries
Rechargeable Lithium-Ion battery (internal battery in this
product)
Battery amount
120mAh
Charging time
Approx. 3.5 hours
Operating time
Approx. 1 week operation time (when fully charged)
ELECOM CO., LTD.
1-1 Fushimi-machi 4-Chome Chuoku, Osaka Japan 541-8765
URL: http://www.elecom.co.jp/global/
overseas@elecom.co.jp
宜麗客 （上海） 貿易有限公司
上海市徐匯区肇嘉浜路 1065 甲号飛雕国際大厦 704 号
電話 : 86-21-33680011
FAX : 86-21-64271706
•
This manual is copyright of ELECOM Co., Ltd.
URL : http://www.elecom-china.com/
•
Unauthorised copying and/or reproducing of all or part of this manual is
ELECOM Korea Co., Ltd.
prohibited.
5F Suam Bldg. 1358-17, Seocho2-dong, Seocho-gu, Seoul 137-862,
•
The specifications and appearance of this product may be changed
Korea
without prior notice for product improvement purposes.
•
ELECOM Co., Ltd. shall bear no responsibility for any and all affects
TEL : 1588-9514
FAX : (02)3472-5533
resulting from the use of this product regardless of the above reasons.
•
Export or service transaction permission under the Foreign Exchange
URL : www.elecom.co.kr
and Foreign Trade Control Law is required in order to export this product
ELECOM Singapore Pte. Ltd
or parts of this product that constitute strategic materials or services.
33 UBI AVENUE 3 # 03-56. VERTEX SINGAPORE (408868)
•
Windows and the Windows logo are trademarks of the Microsoft
TEL : (65)-6347-7747
group of companies.
FAX : (65)-6753-1791
•
Mac, Mac OS, and Macintosh are registered trademarks or
ELECOM India Pvt. Ltd.
trademarks of Apple Inc., in the United States
408-Deepali Building, 92- Nehru Place, New Delhi-110 019, India
•
Company names, product names, and other names in this
TEL: 011-40574543
manual are generally trademarks or registered trademarks.
e-mail: support@elecom-india.com
URL: http://www.elecom-india.com/
产品中有毒有害物质或元素的名称及含量
有毒有害物质或元素
铅
汞
镉
六价铬
多溴联苯
多溴二苯醚
(Pb)
（Hg）
（Cd）
（Cr (VI)）
（PBB）
（PBDE）
○
○
○
○
○
○
○
○
○
○
○
○
Wireless Laser Mouse
M-NE5DL Series
User's manual
1st edition, January 10, 2012
ELECOM Co., Ltd
©2012 ELECOM Co., Ltd. All Rights Reserved.
Advertisement
