Craftsman 917.203920 Operator's Manual page 33

TROUBLESHOOTING CHART:
See appropriate section in manual unless directed to Sears service center
PROBLEM CAUSE
CORRECTION
Loss of drive Freewheel control in
"DISENGAGED" position.
Debris on steering plate (if
equipped).
Motion drive belt worn, damaged,
or broken.
Place freewheel control in
"ENGAGED" position.
See "CLEANING" in the
maintenance section.
3 Replace motion drive belt.
Engine "backfires"
when turning
engine "OFF"
4 Axle key missing.
Engine throttle control not sel
between half and full speed (fast)
position before stopping engine.
4 Install axle key at rear wheel. See
"TO REMOVE WHEEL" in the
Service and Adjustments section.
1 Move throttle control between
half and full speed (fast) position
before stopping engine.
Engine dies when
tractor is shifted
into reverse
Reverse operation system (ROS) 1 Turn ignition key to ROS "ON"
is not "ON" while mower or other position. See Operation section.
attachment is engaged.
NEED HORE HELP?
ryo_lq,,]o. _i._do the
a,_swer arwi moze on ma_lagemyhomeoCOm - ior [ree!
o Find this and aLLyour other product manuals online.
o Get answers from our team of home experts.
o Get a personalized maintenance plan for your home.
° Find information and tools to help with home projects.
brought to you by Sears
33