Advertisement
Setting Oven
Controls
To Start Self Clean
The Self Clean
key controls
the self clean feature.
If you are
planning
to use the oven directly
after a self clean cycle
remember
to allow
time for the oven to cool down and the oven
door to unlock.
This normally
takes about
one hour. A 3 hour self
clean cycle will take about
4 hours to complete.
It is recommend
to use a 2 hour self clean cycle for light cleaning,
a 3 hour cycle
for average
cleaning,
4 hours for a heavy cleaning.
When
the self clean cycle is over, stand to the
side of the oven when opening
the door to allow
hot air or
steam to escape.
Do not force
the oven door open.
This can
damage
the automatic
door locking
system. Use caution
and
avoid
possible
burns when opening
the door after
the self
cleaning
cycle has completed.
The oven may still be very
hot.
To start an immediate
3 hour self clean cycle:
1.
Be sure clock
is set for correct
time of day and door
is
closed.
2.
Press Self Clean.
CLEAN will flash and 3:00
will show in the
display.
The oven will automatically
clean for a 3 hour
period.
Note: if a 2 or 4 hour clean time is desired,
press 2
0 0 for 2 hour or 4 0 0 for a 4 hour clean time.
3.
Press Q.
The DOOR,
LOCKED
icon will flash and the
CLEAN
icon and the letters CLn will remain
in the display.
4.
As soon as the control
is set, the motor
driven
oven door
lock will begin to close automatically.
Once the door
has
been locked
the DOOR
LOCKED
indicator
light will stop
flashing
and remain
on. Also, the oven icon will appear
in
the display.
Note: Allow
15 seconds for the oven door
to lock.
Do not force
the oven door open.
This can
damage
the automatic
door locking
system. Use caution
when
opening
the door after
the self cleaning
cycle is completed.
The
oven may still be very hot.
Important:
When
one oven is set for a self clean, the other oven
will not be operational.
If at this time you wish to delay the self clean starting time,
follow
steps 6 through
9:
5.
Press Delay Start.
6.
Enter the start time numbers
4 3 0 and press _
. CLEAN,
DELAY, LOCK, and DOOR
will be displayed.
Z
The control
will start the self clean at the set delay
start
time selected.
At that time, the DELAY message
will disap-
pear.
When
the self clean is over:
1.
HOT will appear
in the display.
The time of day, the DOOR
LOCKED
and CLEAN
icon will remain
in the display.
2.
Once the oven has cooled
down
for approximately
1 hour,
and the DOOR
LOCKED
icon is no longer
displayed,
the
oven door can then be opened.
Stopping or Interrupting
a Self Cleaning Cycle
If it becomes
necessary
to stop or interrupt
a self cleaning
cycle
due to excessive
smoke or fire in the oven:
1.
Press O
"
2.
The oven door can only be opened
after
the oven has
cooled
down for approximately
1 hour and the DOOR
LOCKED
icon is no longer
displayed.
Note:
If your clock
is set for normal
12 hour display
mode
the
delayed
self clean cycle can never
be set to start more than 12
hours in advance.
To set for delayed
self clean cycle 12 to 24
hours in advance
set the control
for the 24 hour time of day
display
mode.
24
Advertisement
