20
P
OWER TRAIN
Choosing the Correct Fan Bracket Spacer
The fan bracket spacer shown above comes in two different versions. Version A-TT8-00361 is .625" thick. Ver-
sion A-TT8-00363 is .50" thick. Using this guide will make determining which version you need very easy.
Version A-TT8-00361: This part should be used if the cover circled below is a stamped part with a dome in the
center and a ridge around the outside as shown:
Version A-TT8-00363: This part should be used if the cover circled below is a flat sheet as shown:
REV30 8.4.15
TT4-8 4TNV98