Honda CRF250R Owner's Manual page 73

4. Apply grease to the clutch lifter rod (10) and
insert it into the mainshaft.
5. Install the clutch lifter assembly (11) onto the
rod.
(10)
(11)
(10) clutch lifter rod
(11) clutch lifter assembly
6. Install the clutch pressure plate (12).
7. Install the five clutch springs and bolts (13).
8. Tighten the bolts in a crisscross pattern in two
or three steps to the specified torque:
12 N·m (1.2 kgf·m, 9 lbf·ft)
(12)
(13)
(12) clutch pressure plate
(13) clutch springs and bolts
9. Apply oil to a new O-ring (14) and install it in
the groove of the clutch cover (15).
10. Install the cover by tightening the cover bolts
A and B in a crisscross pattern in two or three
steps to the specified torque:
10 N·m (1.0 kgf·m, 7 lbf·ft)
(15)
(14) O-ring (new) (15) clutch cover
Clutch System
11. Fill the crankcase with transmission oil (page
52).
(14)
Servicing Your Honda
65