Table of Contents
Advertisement
2.3
Lens Mounting
If use C-Mount lens, after removing the camera's plastic cover, users need to mount the
C/CS mount adapter to the camera. Then attach the lens onto the C/CS mount adapter,
as the illustrations shown below.
C/CS Mount Adapter
2.4
Connect Alarm I/O
The camera equips one alarm input and one relay output for alarm application. Refer to
alarm pin definition below to connect alarm devices to the IP Camera if needed.
DC 12V / PoE
DC 12V / AC 24V / PoE
2.5
Connect RS485 (for DC12V/AC24V/PoE Model)
The RS-485 connector is the interface for connecting with the pan & tilt positioning sys-
tem.
7
PIN 1: Output+
PIN 2: Output-
PIN 3: Input+
PIN 4: Input-
PIN 6: D-
PIN 7: D+
Completion
Advertisement
Table of Contents
