Centrix F20 User Manual page 10

Additionally, users can change the IP Camera's network property, either DHCP or Static
IP, directly in the device finding list. Refer to the following section for changing the IP
Camera's network property.
Example of Changing IP Camera's Network Property
Users can directly change an IP Camera's network property, ex. from static IP to DHCP,
in the finding device list. The way to change the IP Camera's network property is speci-
fied below:
Step 1: In the finding device list, click on the IP Camera that you would like to
change its network property. On the selected item, right click and select "Network
Setup." Meanwhile, record the IP Camera's MAC address, for future identification.
Step 2: The "Network Setup" page will come out. Select "DHCP," and press
"Apply" button down the page.
Step 3: Click on <OK> on the Note of setting change. Wait for one minute to re-search
the IP Camera.
Step 4: Click on the <Device Search> button to search all the devices. Then select the
IP Camera with the correct MAC address. Double click on the IP Camera, and the login
window will come out.
Step 5: Enter User name and Password to access the IP Camera.
Installing DC Viewer Software Online
For the initial access to the IP Camera, a client program, DC Viewer, will be automatically
installed to your PC when connecting to the IP Camera.
If the Web browser doesn't allow DC Viewer installation, please check the Internet se-
curity settings or ActiveX controls and plug-ins settings (refer to Section: Setup Internet
Security) to continue the process.
The Information Bar (just below the URL bar) may come out and ask for permission to
install the ActiveX Control for displaying video in browser. Right click on the Information
Bar and select <Install ActiveX Control...> to allow the installation.
10