Lens Adjustment (Vari-Focal Lens Only) - Centrix W20X User Manual

Step 5:
Use the supplied Inner Hex Wrench
and cross screwdriver to loosen
the hex bolt / screw on the side of
the Bracket Mount and the Camera
Housing to adjust the position of the
IP Camera.
3.2

Lens Adjustment (Vari-focal Lens only)

Step 1:
Unscrew the screw on the Camera
Housing and remove the Front Hous-
ing.
Step 2:
Power up the IP Camera. Please refer to
installing details.
Step 3:
Access the Camera Browser-viewer for viewing images. Please refer to
tion: Access Camera
Step 4:
Adjust the Zoom / Focus to set the desired zoom / focal length.
Step 5:
Put the Front Housing back, and make sure it's well attached to the Camera
Housing, and tighten the screw.
10
Section: Connectors
for further details.
for more cabling
Sec-