Canon PIXMA iP6220D Service Manual page 24

Paper feed roller cleaning On standalone machine, press the
Bottom plate cleaning
Quiet mode setting
Wireless print setting
Read/write attribute
setting
Contrast adjustment
Slide show setting
Date display
Language selection
machine.
On standalone machine, press the
Menu button, select
Maintenance/settings to move to
Maintenance, and perform the
selection.
Menu button, select
Maintenance/settings to move to
Maintenance, and perform the
selection.
On standalone machine, press the
Menu button, select
Maintenance/settings to move to
Maintenance, and perform the
selection.
On standalone machine, press the
Menu button, select
Maintenance/settings, then Device
settings, and go to Print Settings,
then perform the selection.
Wireless print settings such as
paper type and print layout can be
made.
On standalone machine, press the
Menu button to move to
Maintenance / Settings, select
Device Settings, then perform the
selection.
On standalone machine, press the
Menu button to move to
Maintenance / Settings; select
Device Settings, Other Settings,
and perform the selection.
The contrast of the LCD can be
adjusted.
On standalone machine, press the
Menu button to move to
Maintenance / Settings, select
Device Settings, then Other
Settings, and perform the
selection.
The slide show display quality can
be selected.
On standalone machine, press the
Menu button to move to
Maintenance / Settings; select
Device Settings, Other Settings,
and perform the selection.
On standalone machine, press the
Menu button to move to
Maintenance / Settings; select
Device Settings, Other Settings,
and perform the selection.
The language to be used on the
LCD can be selected.
On standalone machine, press the
Menu button to move to
Maintenance / Settings, select
Device Settings, then perform the
1-18
select Print Head Alignment and click
Check Setting.
Also available from the printer driver
Maintenance.
Also available from the printer driver
Maintenance.
If the problem that smear is on the back
side of the paper is not resolved by Bottom
plate cleaning, clean the plate ribs.
Also available from the printer driver
Maintenance.