Remote Control; To Hear Message Playback By Remote; To Fast-Forward The Tape Using The Handset; To Change Your Outgoing Message Using The Handset - Sanyo CLA-1380 Service Manual

OPERATION
REMOTE CONTROL (FROM THE HANDSET)
You can sass your answering system using the cordless handset.
If ths unit is not sat to tfm auto answer retie, you cannot access the
answering system using the handset.
To hear me88ega playback using the handset
1. Press ths REMOTE button.
The REMOTE mdwtor lights.
The message taps rewinds and
plays back your messages.
After the last message, 3 beeps
sound.
H no messages are recordsd, 3
beeps sound when you press
the REMOTE button.
If 3 seconds elapss with no
operations after 3 bseps,
remote cperation will b
released automatically. Only "T
(OGM REC) and "O"(TURN
OFF) operations are acceptable
within these 3 seconds.
If more than 10 messages have
bsen rscorded, a single long
bsep sounds when you press
the REMOTE button,
To fast-fotwati the tape using
To change your outgoing
the handset
Press and hold "3" during
messag~ ushg ths hand-set
1. Press the REMOTE button 1.
2.
The REMOTE indcator hghts.
The message taps rewinds and
plays back your messages.
Atfer the last message, 3 bseps
sound.
After 3 bseps, press '7"
lmmedhately.
Rscord your new outgoing
message.
Press "6" to timsh recording.
Walt a moment. Your new
outgoing message plays back.
If you change your outgoing
message, the message taps
rewinds to the begmnmg and
any new messages are recOrd-
ed over the old ones.
If you acadentally press the
END button whale rscording, the
recordti contents will be
canceled. In this csse, you
must rscord your outgoing
message from the base stabon
again.
playback.
The message tape fast-
forwards as long as you press
"3".
When You release "3", message
2. Then you can:
a) Repeat message playback
b) Save messages
c) Erase messages
a) To -t ll10s5tl@S pleybsck
After message playback ends
(3 beeps sound), press"1"
(within 10 seconds).
The taps plays back again.
After the last messsge, 3 beeps
sound.
b) To save messages
After messags playbsck ends
(3 bseps sound), press the
END button (or return the
handset to the base station
cradle).
The messsges are savsd, and
any new messages are recoti-
ad after the old ones.
c) To emse messages
Atfer messags playback ends
(3 bseps sound), press "2"
(within 10 ssconds).
The taps rewinds, and 3 beeps
sound. Any new messages are
recorded over the old ones.
pla@ack begins again.
To
rewind the t spe
using the
2.
3.
4.
handset
Press and hold "6" durina 1.
2.
playback.
The messaW taps rewinds as
fong as you press "6".
When you release"6", mes-
sage playback begins again.
To turn off ths answering
system using ths hsrtdsat
1. Press the REMOTE button.
The REMOTE Indmtor hghts.
(If no messsges have been
recorded, 3 bseps sound.)
2. Press "O"Immediately.
The unit turns oft automafiially
H
u
REMOTE
Indicator
0000
REMOTE
000
buiton
\
,
indicator
REMOTE CONTROL (FROM ANOTHER TELEPHONE)
You can access your answering
RemoteAcce8sCode Numbu label
system from another Ikwatlon using
any Touch-Tone telephone. Your
factory-presd remote access code
number (Iocatsd on the bottom of
the unit) helps ensure your privacy
Record your remote access
cods number hem. [ ] [ ]
NOTES
- It the unn is not set to the auto
answer mode, you cannot
access the answering system
from anothsr location. (You
must activate ths system first.
Ses 70 turn on the answenng
system by remote" on page 36.)
- The beepariess remote feature
does not work when you call
the unit from a puke-dialing
telephorw.
3. After Ihstenmgto your messag-
es, you have 3 choices.
a) Repeat message playback
b) Save messages
c) Erase messages
To fast- forward the taps by
remote
1.
Press and hold "3" during
playback.
The message taps tast-tor-
wards as long as you press "Y.
2. When you release '3", message
playback begins again.
To rewind the fapa by remote
a) To repat massages playback
Walt for message playback to
end (3 beeps sound).
Press "1" (wlthm 10 seconds).
The tape plays back again.
After the last message, 3 besps
sound.
1,
2
Press and hold "6" during
playback.
The message taps rewinds as
long as you press '6".
When vou release "6", message
b) To save messege.s
When message playback ends
(3 beeps sound), simply hang
up the phone. The messsges
are saved, and any new
messages are rscorded after
the old ones
playback begins again.
C) To erase messsges
1. Walt for messaae Dlavbsck to
To hear ~ pfayback by remote
end (3 beeps s&rid)."
Dial your phone number and
NOTES:
Press "Y (wlthm 10 seconds).
listen to your outgoing mes-
It no messages are recorded, 3
The message tape rewinds,
sage. besps sound when you enter
and 3 beeps sound.
After you hear the beep at the your rsmote access code.
2. Hang up.
end of the outgoing message,
- The answering system auto-
Any new messages are record.
enter your remote access code ma fically returns to the auto
ed over the old ones.
1.
2.
Within 3 seconds. answer mode in 3 seconds. At
The message taps rewinds and
this point, if you wish. you csn
plays back the messages. After change your outgoing message
the last messsge, 3 beeps
or turn off the answering
sound.
system.
- If more than 10 messages havs
been rscordsd, a single long
beep sounds when you enter
your remote access code.
c ,-
–9–