Fcc; Power Supply; Compliance - Datalogic Viper-NET User Manual

FCC

This device must be opened by qualified personnel only.
Modifications or changes to this equipment without the expressed
written approval of Datalogic could void the authority to use the
equipment.
This device complies with PART 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference which may cause undesired operation.
All Wi-Fi models contain FCC ID: LDK102040.
WARNING: FCC RF EXPOSURE GUIDELINES
To satisfy FCC RF exposure compliance requirements, this device should be used in
hand-held, hand-operated configurations only. The device and its antenna must
maintain a separation distance of 20 cm or more from a person's body, except for the
hands and wrists, to satisfy RF exposure compliance.
This device is designed to be used in a person's hands and its operating
configurations do not support normal transmissions while it is carried in pockets or
holsters next to a person's body.
This device must not be co-located or operated in conjunction with any other
transmitting device.

POWER SUPPLY

For battery charging, this device is intended to be supplied by a UL Listed or
CSA Certified Power Unit marked "Class 2" or "LPS" output rated 12-14 V,
minimum 1 A which supplies power directly to the charger via the jack
connector.

COMPLIANCE

xv