Connection Type: Pptp - ZyXEL Communications NBG6515 User Manual

The following table describes the labels in this screen.
Table 5 Internet Connection Type: PPPoE
LABEL
Internet
Connection
Type
User Name
Password
Exit
Back
Next

2.3.4 Connection Type: PPTP

Point-to-Point Tunneling Protocol (PPTP) is a network protocol that enables transfers of data from a
remote client to a private server, creating a Virtual Private Network (VPN) using TCP/IP-based
networks.
PPTP supports on-demand, multi-protocol, and virtual private networking over public networks,
such as the Internet.
Refer to the appendix for more information on PPTP.
The NBG supports one PPTP server connection at any given time.
Note: This Internet connection type will be supported in the next firmware version.
Figure 9 Internet Connection Type: PPTP
The following table describes the fields in this screen
Table 6 Internet Connection Type: PPTP
LABEL
Internet
Connection
Type
Dynamic IP
Chapter 2 Connection Wizard
DESCRIPTION
Select the PPPoE option for a dial-up connection.
Type the user name given to you by your ISP.
Type the password associated with the user name above.
Click this to close the wizard screen without saving.
Click this to return to the previous screen.
Click this to continue.
DESCRIPTION
Select PPTP from the drop-down list box. To configure a PPTP client, you must configure the
User Name and Password fields for a PPP connection and the PPTP parameters for a PPTP
connection.
Select this radio button if your ISP did not assign you a fixed IP address.
NBG6515 User's Guide
21