Navigation Panel; Ap Select Screen; Wireless Lan 2.4G - ZyXEL Communications NBG6515 User Manual

Table 30 Status Screen: Universal Repeater Mode (continued)
LABEL
Status
Rate

9.5.1 Navigation Panel

Use the menu in the navigation panel to configure NBG features in Universal Repeater Mode.
Figure 48 Menu: Universal Repeater Mode
Refer to Table 27 on page 54

9.6 AP Select Screen

9.6.1 Wireless LAN 2.4G

Use this screen to choose an access point that you want the NBG to connect to. You should know
the security settings of the target AP.
To open this screen, click Network > Wireless LAN 2.4G > AP Select tab.
Chapter 9 Universal Repeater Mode
DESCRIPTION
For the LAN ports, this field displays Down (line is down) or Up (line is up or connected).
For the WLAN, it displays Up when the WLAN is enabled or Down when the WLAN is
disabled.
For the LAN ports, this displays the port speed or N/A when the line is disconnected.
For the WLAN, it displays the maximum transmission rate when the WLAN is enabled and N/
A when the WLAN is disabled.
for descriptions of the labels shown in the navigation panel.
NBG6515 User's Guide
67