•
•
Do's
•
•
•
•
•
•
•
•
•
•
Always wear suitable clothing footwear and eye protection
whilst using the pressure washer/steamer.
Always connect the water supply, remove the lance and
squeeze the trigger to run water through the machine
before switching the power on (pressure washer function).
Always use a suitable hose connector to match the coupling
on the pressure washer/steamer with a non-return valve at
tap end of the supply hose.
Always unplug the pressure washer/steamer before
cleaning or carrying out any maintenance.
Always turn off and unplug the pressure washer/steamer
before disconnecting or connecting the hose/accessories
.After use always wrap the pressure hose and power cord
around the storage clips provided.
Always release any built up pressure prior to disconnecting
the hose and ensure water inlet filter is clean prior to
storage in a cool dry place.
Use only CE approved 13amp extension cords with RCD,
non-approved extension cords may overheat. Care should
be taken to arrange the extension cord as it could be a trip
hazard.
Always make sure the power/extension cord is fully
unwound and prevent the power/extension cord from
getting wet during use.
Always replace the fuse in the plug with a British 13amp
fuse. Always protect the power cable from heated surfaces
or near open flames.
Always carry the pressure washer/steamer by the handle.
Always check water hose and accessories are not damaged,
broken or worn before use.
Always fill the water tank with water only, never add
perfume, and stain removers or products containing alcohol.
Need help?
Do you have a question about the VPW2S PowerPlus STEAM and is the answer not in the manual?
Questions and answers