Table of Contents
Advertisement
Problem
Stripe noise during playback/
recording of a VCR.
Poor or no picture (screen is dark), but
good sound.
Noisy picture when viewing a TV
channel.
Distorted picture when changing
programs
No sound/Noisy sound
Good picture, no sound.
Audio noise.
The Plasma TV fan noise becomes
bigger.
66
Additional Information
Possible remedies
• Video head interference. Keep your VCR away from
the TV.
• Leave a space of 30 cm between your VCR and the
display unit to avoid noise.
• Avoid installing your VCR in front of the display unit
or at the side of the display unit.
• Using the menu system, select the "Picture
Adjustment" menu and select "Reset" to return to the
factory settings (page 26).
• If the
PICTURE OFF indicator lights up in blue,
press
(picture off) on the remote control.
• Using the menu system, select the "Manual Program
Preset" option in the "Set Up" menu and adjust Fine
Tuning (Fine) to obtain better picture reception
(page 36).
• Using the menu system, set the "NR" (Noise
Reduction) option in the "Picture Adjustment" menu to
reduce the noise in the picture (page 26).
• Turn off any equipment connected to the media
receiver unit.
• Press the 2 +/– or
• Check that "Speaker" option is set to "Main" in the
"Features" menu (page 31).
• If headphones are connected, select the "
Link" option in the "Sound adjustment" menu to "Off,"
or disconnect the headphones.
• Make sure that the antenna is connected using the
supplied coaxial cable.
• Keep the antenna cable away from other connecting
cords.
• Do not use 300-ohm twin lead cables as interference
may occur.
• Communication problems may occur if infrared
communication equipment (e.g. infrared cordless
headphones) is used near the Plasma TV.
Please use headphones other than infrared cordless
headphones, move the infrared transceiver away from
the Plasma TV until the noise is eliminated, or move the
transmitter and receiver of the infrared communication
equipment closer together.
• The ventilation holes can accumulate dust over a
period of time. The accumulated dust may make the
cooking function of the built-in fan less effective. To
prevent this, we recommend removing the dust
periodically (once a month) using a vacuum cleaner.
%
(mute) on the remote control.
i
Speaker
Advertisement
Table of Contents
