Manual Adjust 1; Manual Adjust 2; Auto Adjust - Sony dvp-s3000 Service Manual

0. FWD 1TJ : Jump one track forward.
1. RVS 1TJ : Jump one track reversely.
2. FWD 500TJ : Jump 500 tracks forward (fine search).
3. RVS 500TJ : Jump 500 tracks reversely (fine search).
4. HOME : Move to home position.
5. Eject : Eject disc (not including door open). Execute this
with the door left open.
6. Load : Load disc (not including door close)
7. Door Open : Open the front panel door.
8. Door Close : Close the front panel door. Execute this in the
loading completed status.

6-4-6. Manual Adjust 1

Manual Adjust 1
SA.000000 SI.00
0. 4 TRK. Off set
1. Focus Gain
2. TRK. Gain
3. Tilt Gain
4. Sled Gain
5. VCO Offset
DVDSL 12cm
Figure 14
On this screen, manual adjustment can be made where jitter mea-
surement is not executed.
0. TRK Offset : Adjust tracking offset.
1. Focus Gain : Adjust focus gain.
2. TRK Gain : Adjust tracking gain.
3. Tilt Gain : The tilt gain is fixed, and no adjustment is made.
4. Sled Gain : Do not adjust this.
5. VCO Offset: Set VCO control voltage.
EMG.00
xx
6-15

6-4-7. Manual Adjust 2

Manual Adjust 2
SA.000000 SI.00
0. Jitter on
1. 4 Focus Offset xx
2. Tilt Offset
$
DVD_SL 12cm
Figure 15
On this screen, manual adjustment can be made where jitter mea-
surement is executed.
0. Jitter : Turn on/off jitter measurement. Jitter will not be
measured unless the drive runs at CLVS or CLVA.
1. Focus Offset : Adjust focus offset.
2. Tilt offset : Adjust tilt offset.

6-4-8. Auto Adjust

Auto Adjust
SA.000000 SI.00
0. Auto Tilt Gain
1.4 Auto TRK. Offset
2. Auto Tilt Offset
3. Auto Focus Offset
4. Auto EQ
5. Auto Focus Gain
6. Auto TRK. Gain
7.auto VCO
DVDSL
Figure 16
On this screen, each item can be automatically adjusted individu-
ally.
Note, however, that there are some restrictions.
EMG.00
28
EMG.00
12cm