Sony dvp-s3000 Service Manual page 52

Hide thumbs Also See for dvp-s3000:
Table of Contents

Advertisement

5. 24 MHz Adjustment (MB-80 board)
<Purpose>
24 MHz is the reference clock to generate 36 MHz clock, and if it is
not adjusted correctly, checking of 36 MHz will result in NG.
Mode
E-E
Test point
TP022 (512fs)
Instrument
Oscilloscope, Frequency counter
Adjusting element
CT002
Specification
24576000 ±100Hz
Adjusting method:
1) In the "0" Syscon Diagnosis of the test mode initial menu,
select the DVD mode.
2) Confirm that the waveform at TP022 is normal.
3) Adjust CT002 to attain 24576000 ±100Hz.
Figure 7-5
6. 36 MHz Check (MB-80 board)
<Purpose>
36 MHz is the reference clock for audio system to play DVD, and if
it is not adjusted correctly, no sound will be generated or sounds
will be distorted.
Mode
E-E
Test point
TP020 (36 MHz)
Instrument
Oscilloscope, Frequency counter
Specification
36864000 ±150 Hz
Checking method:
1) In the "0" Syscon Diagnosis of the test mode initial menu,
select the DVD mode.
2) Confirm that the waveform at TP020 is normal.
3) Confirm that the frequency is 36864000 ±150 Hz.
Figure 7-6
7. 36 MHz Lock Check (MB-80 board)
<Purpose>
This checks whether 36 MHz is synchronized with reference clock
27 MHz for MPEG system. If it is not locked, the sounds and pic-
tures are not synchronous during MPEG playing or playing is sus-
pended.
Mode
E-E
Test point
TP021 (PH-COMP)
Instrument
Oscilloscope, Frequency counter
Specification
24.0 ±0.01 kHz
Checking method:
1) In the "0" Syscon Diagnosis of the test mode initial menu,
select the DVD mode.
2) Confirm that a rectangular wave at TP021 is locked.
3) Confirm that the frequency is 24.0 ±0.01 kHz.
8. 16 MHz Check (MB-80 board)
<Purpose>
16 MHz is the reference clock for audio system to play CD (includ-
ing video CD), and if it is not adjusted correctly, no sound will be
generated or sounds will be distorted.
Mode
E-E
Test point
IC770 20 pin
Instrument
Oscilloscope, Frequency counter
Specification
16934400 ±75 Hz.
Checking method:
1) Confirm that the waveform at IC770 @º pin is normal.
2) Confirm that the frequency is 16934400 ±75 Hz.
7-3
Figure 7-7
Figure 7-8

Advertisement

Table of Contents
loading

Table of Contents