Getting Started - Reebok TC2.0 User Manual

TC2.0/TC3.0/TX2.0/TXF3.0
CONSOLE USER GUIDE

GeTTING STArTeD

• When the power is switched on the computer will beep and the full screen display will be shown
for 2 seconds (Figure 1). The computer will then enter the user profile setting mode (Figure 2).
• If no use is detected for a period of 4 minutes the computer will switch off. Begin to pedal
to turn back on.
FIGURE 1
FIGURE 2
• You can simply press the QUICK START button to start the workout immediately without setting the
user profiles of pre-set programs. The resistance can be adjusted by rotating the i-Drive at any time.
4

UK
USer proFILe SeTTING
From Power on screen, rotate the i-Drive knob to select the user
(U1, U2, U3, U4, U5) press to confirm selection.
GeNDer
SEX will be displayed on the right side of the screen. Select the
gender by rotating the i-Drive knob, F = female, M = male. Press
the i-Drive to confirm.
AGe
AGE will be displayed on the right side of the screen.
Select by rotating the i-Drive knob. Press the i-Drive to confirm.
HeIGHT
H.t will be displayed on the right side of the screen.
Select by rotating the i-Drive knob, Press the i-Drive to confirm.
WeIGHT
W.t will be displayed on the right side of the screen.
Select by rotating the i-Drive knob, Press the i-Drive to confirm.
The computer will enter the program selection mode.
To change the user code press STOP, then press
and hold RESET button for 3 seconds to return to
power on screen.
AGE
5
reebokfitnessequipment.com