Ikelite 6146.07 Instruction Manual page 17

Digital housing for canon powershot g7 x
Hide thumbs Also See for 6146.07:
Table of Contents

Advertisement

Optional Tray with Dual Release Handles 9523.64
The optional Tray + Dual Handles will add stability and gripping point(s)
for comfortable use of the housing. Add a second strobe to eliminate
shadows and evenly light your subjects.
Use the mounting
procedure below to
attach either a single
or dual tray to an
Ikelite Compact or
ULTRAcompact
housing.
Attach Optional Tray with Release Handle(s) to Housing
1. Place the housing upside
down on a flat surface or in
your lap so that the housing
port is facing toward you as
shown.
2. Line up the 3/8" tray holes
with the housing mounts. If
the tray is positioned
properly, the handle will be
on your left side facing down.
3. Place a shoulder washer in
each 3/8" tray hole with the
small end of the washer facing down.
4. With your free hand, insert and rotate the 12-24 x 1/2" screws clockwise
until threaded into the housing mounts. Finish tightening the tray to the
housing using a flathead screwdriver. Do not overtighten.
MADE IN USA
17

Advertisement

Table of Contents
loading

Table of Contents