Using The Self-Cleaning Oven - GE Monogram 27" Owner's Manual

How to delay
the start of
cleaning
After a
clean cycle
34
1 Press the SELF CLEAN pad.
2 Using the number pads, enter the desired
clean time.
3 Press the DELAY START pad.
4 Using the number pads, enter the time of day
you want the clean cycle to start.
5 Press the START pad.
The door locks automatically. The display will
show the start time. It will not be possible to
open the oven door until the temperature drops
below the lock temperature and the LOCKED
light goes off.
When the LOCKED light is off, open the door.
NOTE: On double oven models, you can set a delay
clean in both ovens at the same time. The second oven
set will automatically delay the start of cleaning until
the end of the first oven's clean cycle.
To recall the start time of the second oven set,
press the DELAY START pad on the controls for
the second oven.
You may notice some white ash in the oven.
Wipe it up with a damp cloth after the oven
cools.
If white spots remain, remove them with a soap-
filled steel wool pad and rinse thoroughly with a
vinegar and water mixture.
These deposits are usually a salt residue that
cannot be removed by the clean cycle.
If the oven is not clean after one clean cycle,
repeat the cycle.

Using the Self-Cleaning Oven

Wall Oven
• You cannot set the oven for cooking until the
oven is cool enough for the door to unlock.
• While the oven is self-cleaning, you can press
the CLOCK pad to display the time of day.
To return to the clean countdown, press the
COOKING TIME pad.
• If the shelves become hard to slide, wipe the
shelf supports with cooking oil.