International Requirements; Warranty Information - Sea Ray 190 Sport Owner's Manual

products in the United States. Sea Ray
that all of its products comply with these laws.
The National Marine Manufacturers Association
(NMMA) provides Sea Ray
certification. The NMMA is an organization
that represents the marine industry and assists
manufacturers, boat dealers, marinas, repair
yards and component suppliers in areas of
legislation, environmental concerns, marine
business growth and state and federal government
agency interaction. The third party certification
that Sea Ray participates in, uses the well known
®
Standards and Recommended Practices of the
American Boat and Yacht Council (ABYC).
Sea Ray Boats participates extensively in the
®
American Boat and Yacht Council which is a
nonprofit organization that develops and publishes
voluntary standards and recommended practices for
boat and equipment design, construction, service
and repair. We utilize all applicable ABYC standards
in the construction of your Sea Ray
Finally, Sea Ray sells their products world wide
®
and as such must conform to the various rules
and regulations required by other countries. Most
notably, are the ISO standards in Europe which
require the application of the Common European
(CE) mark. This mark, much like the NMMA
certification here in the US, gives you the boat owner
specific information concerning your craft.
9. p , s , p
rep ervice
Y b
for our oaT
Sea Ray advises that all rigging, installation, and
®
prep work on any Sea Ray
an authorized dealer at the authorized dealer's
location.
When your boat needs service, parts or repair, take
it to an authorized Sea Ray
in your area contact Sea Ray
www.searay.com (international customers please
visit international.searay.com).
Sea Ray Boats
I
nTroducTIon
ensures
®
with a third party
®
boat.
®
r
arTs anD epair
product be done by
®
dealer. To find a dealer
®
via the internet at
®
To find repair and parts facilities for the equipment
installed on your boat, refer to the section or manual
for that component.
If a problem is not handled to your satisfaction:
1. Discuss any warranty-related problems directly
with the service manager of the dealership
or your sales person. give the dealer an
opportunity to help the service department
resolve the matter for you.
2. If a problem arises that has not been resolved
to your satisfaction by your dealer, contact Sea
Ray via the internet at www.searay.com and
®
the appropriate customer service information
will be provided to you.
10. i
nTernaTional
Depending on your boat's original destination, the
vessel and its systems may have been constructed
in accordance with standards and specifications
published by various international authorities such
as:
• Construction Standards for Small Vessels -
Canada
• Recreational Craft Directive and applicable ISO
Standards - European Union
• AS/NZ 3004 Electrical Installations - Australia/
New Zealand
Further information concerning these requirements
may be obtained from your local dealer.
11. W i
arranTY nforMaTion
You will find information regarding the Sea Ray
warranty following the introduction. A warranty
information card is also included in the owner
information packet. If for some reason this information
is missing, contact your Sea Ray
r
equireMenTs
dealer.
®
vii
®