Advertisement
Quick Links
Mood Cluster
RGB LED wash effect with cluster & firework effects
9w RGB LED backwash effect with laser cluster and firework effects
Sound-to-Light, Auto, DMX and Master/Slave modes
8 channel DMX512 operation
XLR DMX in and out
Linkable Master/Slave in Sound-to-Light mode
40mW green laser / 100mW red laser
9w RGB LED wash effect
Numerous patterns available for selection
Fan cooled operation & tough metal chassis
Adjustable hanging bracket
Key operated power control
For the latest instruction manual updates and information on the entire Kam range visit:
www.kam.co.uk
Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ
Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: mail@lambaplc.com • Web: www.lambaplc.com
If this product is ever no longer functional please take it to a recycling plant for environmentally friendly disposal.
Due to continuous product development, specifications and appearance are subject to change.
© COPYRIGHT LAMBA plc 2009. E&O E.
Advertisement
Summary of Contents for KAM Mood Cluster
- Page 1 For the latest instruction manual updates and information on the entire Kam range visit: www.kam.co.uk Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: mail@lambaplc.com • Web: www.lambaplc.com If this product is ever no longer functional please take it to a recycling plant for environmentally friendly disposal.
-
Page 2: Occupation Of The Xlr-Connection
To optimise the performance of this product, please read these operating instructions carefully to familiarize yourself with the basic operations of this unit. The KAM LED Mood Cluster has been designed to create amazing laser effects. Please keep these user instructions in a safe place for future reference. -
Page 3: Building A Serial Dmx-Chain
BUILDING A SERIAL DMX-CHAIN Master / slave no controller Set the master unit to desired effect, use the menu button, followed by the up and down buttons to select desired master effect. For example: Auto mixed Slow laser effect with random order with manual control of led wash effect Then press the enter button to confirm selection To set slave unit Use the menu button and the up/down button to select “SLA”... -
Page 4: Front Panel
FRONT PANEL NAME DESCRIPTION The laser effect output aperture. NEVER LOOK INSIDE THE Laser FIXTURE THROUGH THIS Aperture APERTURE WHILE FIXTURE IS OPERATING. LED Aperture The LED effect output aperture. REAR PANEL NAME DESCRIPTION Main Power Input IEC socket and integrated fuse holder. Power Switch ON and OFF switch Key Switch... - Page 5 Standalone pre-programmed laser show Press FUNC to enter the mode option. Keep pressing until the LED panel shows one of the following: ArA, ASr, AFd, ASd, SrA, SSr, SFd, SSd. Press UP or DOWN to select your favourite Standalone mode as above. Press ENTER to confirm the setting.
- Page 6 DMX protocol CHANNEL DMX VALUE DESCRIPTION 000-025 Laser Black Out 026-050 Mixed laser effect Auto show with rAndom led 051-075 Auto mixed Slow laser effect with random led 076-100 Auto Fast dots laser effect 101-125 Auto Slow dots laser effect 1 - MODE 126-150 Sound activated rAndom mixed laser effect...
-
Page 7: Specifications
SPECIFICATIONS Mains Input: AC100-240V, 50/60Hz Fuse: 250V 1.6A Slow Blow (20mm Glass) Total Power: 25W Music Control: Internal microphone Laser Power: 40mW 532nm Green CW 100mW 650nm Red CW Laser Classification: Class 3B Laser Safety Standard: EN60825-1 2007 Condition Temperature: 10~40℃ DMX Connections: 3 pins XLR Male/Female DMX Channels: 8 channels Measurement: See diagram below...