Advertisement
Quick Links
PowerGlide
Multicolour sweeping beam effects
M
A
N
U
A
L
V
E
R
S
I
O
N
1
.
0
0 5 - 1 1 - 1 4
For the latest instruction manual updates and information on the entire Kam range visit:
www.kam.co.uk
Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ
Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: mail@lambaplc.com • Web: www.lambaplc.com
If this product is ever no longer functional please take it to a recycling plant for environmentally friendly disposal.
Due to continuous product development, specifications and appearance are subject to change.
© Copyright Lamba plc. E&OE.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for KAM PowerGlide
Summary of Contents for KAM PowerGlide
- Page 1 For the latest instruction manual updates and information on the entire Kam range visit: www.kam.co.uk Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: mail@lambaplc.com • Web: www.lambaplc.com If this product is ever no longer functional please take it to a recycling plant for environmentally friendly disposal.
- Page 2 Thank you for purchasing this Kam product, we are sure that it will serve you for many years to come. To optimise it’s performance, please read these instructions carefully to familiarise yourself with the basic operations of the unit. Please retain them for future reference.This unit has been tested at the factory before being shipped to you. To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or moisture.
- Page 3 DMX-512 connection If you are using a standard DMX controller, you can connect the DMX output of the controller directly to the DMX input of the first unit in a DMX chain. If you wish to connect a DMX controller with other XLR outputs you will need to use adapter cables. 1 = ground 2 = minus signal (-) 3 = plus signal (+)
- Page 4 Rear panel Control LED display Addr A001 A512 Display Function ChNd Set the DMX address for the unit. Addr Use the Up and Down buttons to set. 12Ch 18Ch Set the DMX channel mode. SLNd NASt ChNd Choose from 1, 6, 8, 12 or 18 channels. SL 1 Set the unit to Master/Slave mode.
- Page 5 1 channel DMX operation (choose A001 address) Channel Value Function 000-007 No Function 008-022 Show 01 023-037 Show 02 038-052 Show 03 053-067 Show 04 068-082 Show 05 083-097 Show 06 098-112 Show 07 (008-255 113-127 Show 08 can also be 128-142 Show 09 used with...
- Page 6 6 / 8 / 18 channel DMX operation 6 channel 8 channel 18 channel Value Function 000-255 Tilt 1 0 ~ 270 degrees 000-255 Tilt 1 Driver speed, fast to slow 000-255 Tilt 2 0 ~ 270 degrees 000-255 Tilt Driver speed, fast to slow 000-255 Full dimmer, 0-100% 000-008...
- Page 7 Technical specifications Kam PowerGlide Mains power AC 110-240V 50/60Hz Mains connection IEC mains input and output Fuse F7A L250V Control modes DMX512 / Auto / Sound-to-Light / Master/Slave Light source 8 x 10w CREE 4-in-1 LED Colours Red, green, blue and white...
Need help?
Do you have a question about the PowerGlide and is the answer not in the manual?
Questions and answers
Can I use one control pedal to operate two light bar units ?
Yes, one control pedal can operate two KAM PowerGlide light bar units if they are connected in a DMX chain. Connect the DMX output of the first unit to the DMX input of the second unit.
This answer is automatically generated