Advertisement
FRONT PANEL
NO.
NAME
Laser
1
Aperture
2
LED Aperture
REAR PANEL
NO.
NAME
1
Main Power Input
2
Power Switch
3
Key Switch
4
Interlock
5
DMX input
6
DMX output
7
Microphone
8
LED Speed
9
Mic Sensitivity Knob
9
Mic Sensitivity Knob
10
Control Panel
11
Cooling
12
Safety eyelet
OPERATING MODE
When laser is powered on, LED monitor on rear panel shows the current operating standalone mode or
DMX address of DMX mode. With help of LED control panel, it is very easy to set and change the
operating mode of laser. After every resetting and saved, the new mode information will be shown on LED
monitor at next power on.
Mode/Function Option, to choose the operating mode of laser.
Confirmation - to confirm all settings or change of LED control panel.
UP/DOWN, to change operating mode, parameter or DMX address.
DESCRIPTION
The laser effect output aperture.
NEVER LOOK INSIDE THE
FIXTURE THROUGH THIS
APERTURE WHILE FIXTURE
IS OPERATING.
The LED effect output aperture.
DESCRIPTION
IEC socket and integrated fuse holder.
ON and OFF switch
Safety key switch unit will not operate with this turned off
Used to connect an optional emergency stop button. When the contact is closed the
laser will Black-out immediately. This must be wired by a qualified engineer
3 pins male XLR connector
3 pins female XLR connector
To detect the music/sound signal
LED effect rotating speed
Turning this knob clockwise increases the sound sensitivity
Turn the knob (potentiometer) until the laser works in sync with the music.
To control the fixture with digital LED display, check more information on CONTROL
& FUNCTION
Forced air fan cooling
Attach safety chain or rope to this point
Advertisement
