Intended use b. Use safety equipment. Always wear eye protection. Your Black & Decker saw has been designed for sawing wood Safety equipment such as dust mask, non-skid safety and wood products. shoes, hard hat, or hearing protection used for This tool is intended for consumer use only.
Page 5
g. Use the power tool, accessories and tool bits etc., – when the blade is pinched or bound tightly by the kerf in accordance with these instructions and in the closing down, the blade stalls and the motor reaction manner intended for the particular type of power drives the unit rapidly back toward the operator;...
Page 6
Safety instructions for saws with a pendulum blade guard Do not use blades of larger or smaller diameter than Check lower guard for proper closing before each recommended. For the proper blade rating refer to the use. Do not operate the saw if lower guard does not technical data.
Page 7
Switching on KS64(K)/KS65K: set the saw shoe to the minimum depth Keep the lock-off button (2) depressed and press the of cut as described below. KS55: the screws (23) can be on/off switch (1). accessed through the holes in the guard.
Technical data Regularly clean the ventilation slots with a clean, dry paint brush. KS55 KS64 KS65 To clean the tool, use only mild soap and a damp cloth. Input voltage Never let any liquid get inside the tool and never immerse (Australia &...
EC declaration of conformity KS55/KS64/KS65 Black & Decker declares that these products conform to: 98/37/EC, 89/336/EEC, EN 60745, EN 55014, EN 61000 Kevin Hewitt Director of Consumer Engineering Spennymoor, County Durham DL16 6JG, United Kingdom 1-5-2006 Guarantee Black & Decker is confident of the quality of its products and offers an outstanding guarantee.