Intended use 3. Personal safety a. Stay alert, watch what you are doing and use common Your Black & Decker saw has been designed for sawing wood sense when operating a power tool. Do not use a power and wood products. This tool is intended for consumer use only. tool while you are tired or under the influence of drugs, Safety instructions alcohol or medication.
f. Keep cutting tools sharp and clean. Properly maintained Further safety instructions for all saws cutting tools with sharp cutting edges are less likely to Causes and operator prevention of kickback: bind and are easier to control. kickback is a sudden reaction to a pinched, bound or g.
Safety instructions for circular saws with outer or inner - Risk of accidents caused by the uncovered parts of the pendulum guards and with tow guard rotating saw blade. a. Check lower guard for proper closing before each - Risk of injury when changing the blade. use.
Insert a screwdriver into the hole (16) to prevent the saw Electrical safety blade from rotating. Securely tighten the blade retaining screw by turning it This tool is double insulated; therefore no earth wire clockwise using the spanner (14) supplied. is required.
The height difference between the toothed rim and the lower Insert the dust extraction adaptor (23) into the saw dust end of the riving knife should be 2 - 3 mm. outlet (15). Tighten the screw. Connect the vacuum cleaner hose to the adaptor. Fitting and removing the parallel fence (fig.
Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: www.2helpU.com Technical data CD601 TYPE 3 CD602 TYPE 3 Input voltage Power input W 1,100 1,150...
Guarantee Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.
ENGLISH Do not forget to register your product! www.blackanddecker.co.uk/productregistration Register your product online at www.blackanddecker.co.uk/productregistration or send your name, surname and product code to Black & Decker in your country.
Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +64 9 259 1133 5 Te Apunga Place Fax +64 9 259 1122 Mt Wellington Auckland 1060 United Kingdom Black &...