Intended use Remove adjusting keys and wrenches Your Black & Decker jigsaw has been designed for sawing Always check that adjusting keys and wrenches are removed wood, plastics and sheet metal. This tool is intended for from the tool before operating the tool. consumer use only.
Electrical safety This tool is double insulated; therefore no earth wire Warning! Never use the tool when the saw shoe is loose or is required. Always check that the power supply removed. corresponds to the voltage on the rating plate. Adjusting the shoe plate for bevel cuts (fig.
Saw from the back surface of the workpiece. Technical data To minimise splintering, clamp a piece of scrap wood or hardboard to both sides of the workpiece and saw KS999E through this sandwich. Power input Number of strokes (no load)
To claim on the guarantee, you will need to submit proof of Australia WALT Industrial Power Tool Company purchase to the seller or an authorised repair agent. You can 7 Clarice Road Tel. 03 9895 9200 check the location of your nearest authorised repair agent by Box Hill, Victoria 3128 Fax 03 9899 7465 contacting your local Black &...