Honda GL1100 Interstate Owner's Manual page 56

V
10. Remove thrse linal drive case nuts
(1 2 ) .
11 . Mo ve th e w hee l ba c k w a rd
12. Separate the final drive case from the
wheel.
13 . R e mov e t he whe el
CAUTION :
* Do not ld! the final drfue case over'
The gear oil maY ftow out of the
breather.
NO TE :
* Do not depress the brake pedal while
the wheel is off the motorcycle The'
cvlinder with subsequent loss I
Ii this occurs, serviciig ofthc
*tiii" t"""rt"tt t*rJurauthorized
dealer.
INSTALLATION
Before installing the rear wheel, lift
driven flange (l) out oI the hub'
lithium-base multipurposeNLGINo 2
additiv€) grease to the flnal driven
(2) and splines (3) and ring gear
Reinstall the final driven flange
(l)
wheel hub
(1) Fiml driven llrnge
(2) Flange Pins
(12) Final drive cas€ nuts
caliper pistons will be forced out olthe