Table of Contents
Advertisement
Wing Nut
Chute
Deflector
Chute
Opening
Mulching
Plug
Figure 7
Deck Hanger
Channel
Figure 8
INSTALLING THE MULCHING PLUG
(OPTIONAL EQUIPMENT)
1. Remove the mulching plug from the box packed
with your lawn tractor (If not already removed
from the deck).
2. Remove the wing nut from the bolt on the
mulching plug.
3. Lift up the chute deflector and insert the
mulching plug through chute opening.
See Figure 7.
4. Line up the bolt on the mulching plug with the
hole in the top of the deck. Push up on the end
Hole in
of the mulching plug and secure with the wing
Deck
nut.
Bolt
TIRE PRESSURE
The tires on your unit may be over-inflated for
shipping purposes. Reduce the tire pressure before
operating the unit. Recommended operating tire
pressure is approximately 10 p.s.i. Check sidewall of
tire for maximum p.s.i.
Adjustable
LEVELING THE DECK
Lift Link
With unit on hard, level surface, place the blades in
a straight line, and measure the distance from the
outside edge of the blade tips to the ground.
If adjustment is needed, proceed as follows.
1. Remove the hairpin clip and flat washer from the
bottom of the adjustable lift link on the left side of
the deck. (Hairpin clip and flat washer are on the
inside of the lift link.)
2. Pull the adjustable lift link out of the deck hanger
channel. See Figure 8. Turn the adjustable lift
link up or down as necessary to level the deck.
Usually only one or two turns are needed.
3. Insert the end of the adjustable lift link into the
hole in the deck hanger channel. Recheck the
adjustment. Readjust if necessary.
4. When deck is level, secure end of adjustable lift
link with flat washer and hairpin clip.
10
WARNING:
Maximum
under any circumstances is 30 p.s.i. Equal
tire pressure should be maintained on all
tires.
tire
pressure
Hide quick links:
Advertisement
Table of Contents
