Download Print this page

Black & Decker KD400 Original Instruction

Corded drill
Hide thumbs

Advertisement

®
KD400
KD561 KD661
KD562 KD662
KD564 KD664
1

Advertisement

loading

  Summary of Contents for Black & Decker KD400

  • Page 1 ® KD400 KD561 KD661 KD562 KD662 KD564 KD664...
  • Page 2 Congratulations! On the purchase of your Black & Decker corded drill. To ensure the best results from your corded drill please read these safety and usage instructions carefully. If you have any questions or queries after reading this manual please do not hesitate to call your local service and information centre (the number is towards the back of this manual).
  • Page 3: Table Of Contents

    Contents Page 4 Safety instructions Double insulation Page 5 Electrical safety Mains plug replacement Extension cables Unwanted tools and the environment The Black & Decker guarantee Page 6 After sales service for your Black & Decker product Our after sales service policy Accessories Technical data Features...
  • Page 4: Safety Instructions

    Corded drills user manual SAFETY INSTRUCTIONS • Maintain the tool with care. Keep a cutting tool Warning! When using electric tools, the following sharp and clean for better and safer performance. basic safety precautions should always be taken to Follow the instructions for lubricating and changing reduce the risk of fire, electric shock and personal accessories.
  • Page 5: Electrical Safety

    ENGLISH from the mains power supply. This is done by fixed at the terminal screws. If the fuse cover is placing insulation barriers between the missing or damaged do not use the plug. For electrical and mechanical components making replacement or detachable fuse covers, contact a it unnecessary for the tool to be earthed.
  • Page 6: Accessories

    ENGLISH This guarantee is offered as an extra benefit and is additional to the customers statutory rights. • AFTER SALES SERVICE FOR THE BLACK & DECKER • PRODUCT (UK, AUSTRALIA AND NEW ZEALAND ONLY) Black & Decker offers a nationwide after sales service •...
  • Page 7: Fitting The Drill Bit

    ENGLISH FITTING THE DRILL BIT (KEYED CHUCKS) Use only the correct chuck key. Place the chuck key Proceed as follows: into the chuck, and hold the drill firmly in one hand with Disconnect the plug from the electricity supply. the chuck pointing away from you. Rotate the chuck so Rotate the barrel that the chuck key is just above the horizontal position of the chuck until...
  • Page 8: Using Your Drill

    EC DECLARATION OF CONFORMITY switch is released. We declare that units: KD400, KD561, KD562, KD564RE, If continuous KD564CRE, KD661, KD662, KD664RE, KD664CRE operation is conform to 89/392/EEC, 89/336/EEC, EN55014,...
  • Page 10 Australia Black & Decker (A’asia) Pty Ltd Tel: 03 9213 8200 286-288 Maroondah Highway Fax: 03 9726 7150 North Croydon, Victoria 3136 New Zealand Black & Decker Tel: 09 579 7600 483 Great South Road, Penrose, Auckland Fax: 09 579 8200 South Africa Powerdek Tool Distributors Tel: 011 493 4000...
  • Page 12 12Part no: 808378-42 5/98.2...