How To Use - Eureka 4750 Series Owner's Manual

FIG. 11a
14
ENGLISH

How To Use

CAUTION: Do not plug in cleaner until you understand all controls
Step 1: Plug in Vacuum. (FIG. 10) Unwrap the cord by turning the quick
release cord hook (FIG. 10a), unwind the cord and plug into an
appropriate outlet. The plug has a wider prong that will only fit one way
into the receptacle. (FIG. 10b)
FIG. 10b
FIG. 10a
FIG. 10
Step 2: Put Cord on Cord Retainer. (FIG. 11) To use, push electrical cord
down into cord retainer (FIG. 11a). You will find your cord retainer on the
handle above the upper cord hook. This will place the cord out of the way
the next time you vacuum.
FIG. 11
Step 3: ON/OFF Switch. (FIG. 12) The ON/OFF switch is on the base.
Press once to turn on and press again to turn off.
FIG. 12
(CONTINUED)
and features.