Page 1
L L e e G G u u i i d d e e d d u u P P r r o o p p r r i i é é t t a a i i r r e e Before Returning, Call Eureka Customer Service Antes de enviar de regreso, Ilame al Servico al Cliente de Eureka Avant de le retourner, appelez le service à la clientèle Eureka HELPLINE LIGNE D’AIDE...
Eureka vacuum cleaner. Inspection Carefully unpack and inspect your new Eureka vacuum cleaner for shipping damage. Each unit is tested and thoroughly inspected before shipping. For instructions regarding any shipping damage, call Eureka Customer Service HELPLINE 1-800-282-2886 immediately.
If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way. Motor Do Not Oil the motor or the brush roll at any time. The bearings are permanently lubricated and sealed. Eureka Customer Service HELPLINE 1-800-282-2886 www.eureka.com...
FILTER DCF 4/18 – Replace within 6 months Remove filter. Install new filter. Line up cover and lock. BRUSH ROLL – Clean monthly EXT-U Belt Brush Roll EXT-U BELT – Replace worn, cut or out of shape belt Eureka Customer Service HELPLINE 1-800-282-2886 www.eureka.com...
2) Attach Power Paw to the end of wand and hose. Vacuum must be turned off before removing debris from Power Paw. The Power Paw name is a registered trademark of Electrolux Home Care Products, Inc. Eureka Customer Service HELPLINE 1-800-282-2886 www.eureka.com...
2) Remove lens cover and old bulb. 3) Replace with bulb rated 12v., 10w., Type 904. Push in new bulb, replace lens cover and replace screws (Fig. 8). Make certain bulb will not touch lens Fig. 7 Fig. 8 cover. www.eureka.com Eureka Customer Service HELPLINE 1-800-282-2886...
Your relief for the breach of this warranty is limited to Eureka will, at its option, repair or replace a defective the relief expressly provided above. In no event shall the vacuum or vacuum part that is covered by this warranty.
30 minutes before attempting to use the vacuum. After the 30 minute period, plug the vacuum back in and turn on the switch. If the vacuum still does not work, take it to a Eureka authorized service center for repair or call 1-800-282-2886.
Need help?
Do you have a question about the 4710 Series and is the answer not in the manual?
Questions and answers