Rear Panel - Inter-m PB-6207 Operation Manual

BATTERY CHARGER

Rear Panel

Rear Panel
1
1. AC POWER INPUT TERMINAL
It is the terminal connecting power cord.
There is AC power fuse if you open the fuse cap, and confirm the rating and use the same capacity product
when replacing it.
2. ADDRESS SETTING SWITCH
It is the switch which set up the device number.
For details of equipment setting, please refer to page 4.
3. BATTERY CONNECTING TERMINAL (BATTERY IN)
It is the terminal which connects and charges the battery. Caution to polarities when it connects.
4. LINK IN/OUT TERMINAL
It is the communication terminal to monitor the line check result from PC.
Link in is connected to the previous device, and Link out is connected to the next device.
PIN NO.
1
2
3
4
5
6
7
8
※Same for all IN/OUT terminals.
6
PB-6207
2
Functions
RS-485 Data - A
RS-485 Data - B
RS-485 Data - Z
NA
GND
RS-485 Data - Y
NA
NA
3 4 5