Setting Midi Out; Receiving Midi File Dump; Sending Midi File Dump - Chauvet Stage Designer 50 TFX-48B User Manual

Setting MIDI OUT

Action 
4) While holding down the RECORD button,
simultaneously tap Flash button #2 three
times. The display reads MIDI CHANNEL
OUT to indicate channel setup is available.
5) Select the MIDI control channel (1~16) by
tapping Flash buttons 1~16. The relevant
channel LED lights indicating MIDI OUT
channel is set.
6) While holding down RECORD, tap the
REC EXIT button to exit MIDI setting.

Receiving MIDI File Dump

Action 
7) While holding down the RECORD button,
simultaneously tap Flash button #3 three
times. The display reads MIDI FILEDUMP
RECVING 000% when the device is in the
correct mode.
8) While holding down RECORD, tap the
REC EXIT button to exit MIDI setting.

Sending MIDI File Dump

Action 
9) While holding down the RECORD button,
simultaneously tap Flash button #4 three
times. The display reads MIDI FILEDUMP
SENDING 000% when the device is in the
correct mode.
10) While holding down RECORD, tap the
REC EXIT button to exit MIDI setting.
Stage Designer™ 50 User Manual

Notes
This is the Channel that the controller will transmit
MIDI note commands.

Notes
This is the process of copying your entire show to
another TFX-48B. This will not work with any other
device.
This process can take several minutes to complete.
The controller will automatically begin sending the
FILE DUMP once the mode has been selected.
Therefore, be sure that the other device has previously
been setup to receive the transfer.
During FILE DUMP, all other operations will cease to
function.
If errors or power failure occurs, FILE DUMP will be
interrupted and stop.

Notes
This is the process of copying your entire show to
another TFX-48B. This will not work with any other
device.
This process can take several minutes to complete.
The controller will automatically begin sending the
FILE DUMP once the mode has been selected.
Therefore, be sure that the other device has previously
been setup to receive the transfer.
During FILE DUMP, all other operations will cease to
function.
If errors or power failure occurs, FILE DUMP will be
interrupted and stop.
17
Revised: 2008-08-25 16:16:53