Specifications - Aiwa Z-L700 Service Manual

<FM tuner section>
Tuning range
Usable sensitivity (IHF)
Antenna terminals
<AM tuner section>
Tuning range
Usable sensitivity
Antenna
<Amplifier section>
Mid-high frequency amplifier
Power output
Total harmonic distortion
Low frequency amplifier
Power output
Total harmonic distortion
Inputs
Outputs
<Compact disc player section>
Laser
D-A converter
Signal-to-noise ratio
Harmonic distortion
Wow and flutter
<Cassette deck section>
Track format
Frequency response
Signal-to-noise ratio
Recording system
Heads

SPECIFICATIONS

87.5 MHz to 108 MHz
13.2 dBf
75 ohms (unbalanced)
530 kHz to 1710 kHz (10 kHz step)
531 kHz to 1602 kHz (9 kHz step)
µ
350 V/m
Loop antenna
U : 40 W + 40 W
(200 Hz to 20 kHz, T.H.D. less than
1 %, 8 ohms)
LH : Rated 37 W + 37 W
(1 kHz, T.H.D. 1 %, 8 ohms)
Reference : 45 W + 45 W (8 ohms,
T.H.D. 10 %, 1 kHz)
U : 0.15 % (15 W, 1 kHz, 8 ohms)
U : 120 W + 120 W
(50 Hz to 200 Hz, T.H.D. less than
1 %, 6 ohms)
LH : Rated 110 W + 110 W
(75 Hz, T.H.D. 1 %, 6 ohms)
Reference : 135 W + 135 W (6 ohms,
T.H.D. 10 %, 75 Hz)
U : 0.15 % (60 W, 75 Hz, 6 ohms)
LH : 0.15 % (45 W, 75 Hz, 6 ohms)
VIDEO / AUX: 310 mV (adjustable)
PHONO : 400 mV (47 kohms)
MIC 1,MIC 2 : 1.4 mV (20 kohms)
CD DIGITAL OUT (OPTICAL)
SPEAKERS HIGH FREQ : accept
speakers of 8 ohms or more
SPEAKERS LOW FREQ : accept
speakers of 6 ohms or more
SURROUND SPEAKERS : accept
speakers of 8 – 16 ohms or more
PHONES (stereo jack): accepts
headphones of 32 ohms or more
Semiconductor laser (λ = 780 nm)
1 bit dual
85 dB (1 kHz, 0 dB)
0.05 % (1 kHz, 0 dB)
Unmeasurable
4 tracks, 2 channels stereo
CrO tape : 50 Hz – 16000 Hz
2
Normal tape : 50 Hz – 15000 Hz
50 dB (CrO tape peak level,
2
above 400 Hz)
AC bias
Deck 1 : Playback head x 1
Deck 2 : Recording / Playback /
erase head x 1
<Speaker system SX–WZL700 (U)>
Cabinet type
Speakers
Impedance
Output sound pressure level 88 dB/W/m
Dimensions
(W x H x D)
Weight
<Speaker system SX–WZL800 (LH)>
Cabinet type
Speakers
Impedance
Output sound pressure level 88 dB/W/m
Dimensions
(W x H x D)
Weight
<General>
Power requirements
Power consumption
Power consumption
in standby mode (LH)
Dimensions of main unit
(W x H x D)
Weight of main unit
• Design and specifications are subject to change without notice.
• The word "BBE"and the "BBE symbol" are trademarks of BBE
Sound, Inc.
Under license from BBE Sound,Inc.
– 2 –
3 way, built-in subwoofer
Subwoofer :
200 mm (7 7 / in.) cone type
8
Full range :
120 mm (4 3 / in.) cone type
4
Super tweeter:
3
60 mm (2 / in.) ceramic type
8
6 ohms / 8 ohms
260 x 495 x 355 mm
(10 1 / x 19 1 / x 14 in.)
4 2
8.5 kg (18 lbs 12 oz.)
3 way, built-in subwoofer
Subwoofer :
200 mm (7 7 / in.) cone type
8
Full range :
3
120 mm (4 / in.) cone type
4
Super tweeter:
60 mm (2 3 / in.) cone type
8
6 ohms / 8 ohms
260 x 495 x 355 mm
1 1
(10 / x 19 / x 14 in.)
4 2
8.5 kg (18 lbs 12 oz.)
U : 120 V AC, 60 Hz
LH : 120 V / 220 – 230 V / 240 V AC,
(switchable), 50 / 60 Hz
U : 210 W
LH : 240 W
With power-economizing
mode off : 45 W
With power-economizing
mode on : 0.9 W
360 x 395.3 x 402.3 mm
1 5 7
(14 / x 15 / x 15 / in.)
4 8 8
U : 12.5 kg (27 lbs 9 oz.)
LH : 12.4 kg