Navigate To A Point Of Interest - Lowrance GlobalMap 7000C Operation Instructions Manual

Navigate to cursor. In this example, the cursor has selected the town of
3. Press
MENU
the cursor location.
The Map Page will display a red line from your current position to the cur-
sor position. The Navigation Page displays a compass rose showing naviga-
tion information to your destination. See the following examples.
The 30-mile zoom figure at left clearly shows the red course line connect-
ing your current position to your destination. The 30-mile zoom, center,
shows both current position and direction to destination on screen. The
Navigation Page, right, will also show navigation information.
To stop navigating to the cursor, use the Cancel Navigation command:
press |
MENU MENU
GlobalMap 7000C stops showing navigation information.

Navigate to a Point of Interest

For POIs that are in view on the map, you can easily use the Navigate
to Cursor command above; just use the cursor to select the POI.
The other method involves searching for POIs with the Find Waypoint
command, launched with the
Oologah, Oklahoma.
| and the GlobalMap 7000C will begin navigating to
ENT
|↓ to
C
ANCEL
N
AVIGATION
key. (See the searching example ear-
WPT
42
| |← to
ENT Y
| . The
ENT
ES