For connectors and wiring information for another device, see page 16.
For assistance in configuring the unit to communicate with another
device, consult the factory; customer service phone numbers are in the
back of this manual. Also see the entries below for Configure DGPS and
Configure NMEA. To set Com Port Configuration:
1. Press
MENU
2. Press ↓ to
C
Configure DGPS
This unit will recognize Starlink
receivers.
1. Press
MENU
2. Press ↓ to
C
A. If you have a Magnavox receiver, press ↓ to
B. If you have a Lowrance or Starlink receiver, press ↓ to
C. If you have a Magnavox or Starlink, press
the only setup necessary. If you have a Lowrance receiver or another
Magnavox- or Starlink- compatible brand, continue with these steps:
3. Press ↓ to
C
NOTE:
The names of the NMEA sentences are abbreviated in this menu.
These are the functions of the various selectable prefixes:
•
GLL transmits latitude and longitude of present position, time
of position fix, and status.
•
RMC and RMB transmits navigation information messages.
•
APB transmits autopilot information.
Menus for changing Com Port settings.
|
|↓ to
MENU
S
P
OMMUNICATIONS
|
|↓ to
MENU
S
P
OMMUNICATIONS
DGPS
ONFIGURE
|
S
ENT
YSTEM
ETUP
|
.
ENT
ORT
, Magnavox
|
S
ENT
YSTEM
ETUP
|
.
ENT
ORT
|
.
ENT
70
.
and Lowrance DGPS
.
|
M
ENT
AGNAVOX
S
|
|
EXIT
EXIT
EXIT
.
|
.
ENT
TARLINK
. This is