Trails; Delete A Trail - Lowrance GlobalMap 4800M Operation Instructions Manual

Navigating along a route: Fig. 1 shows the Navigation Page at the start
of a route, heading straight for the first waypoint (Wpt 1). In Fig. 2, the
traveler has arrived at Wpt 1; the arrival alarm has been triggered and
the bearing arrow on the compass rose has turned to point toward Wpt
2, off to the east. In Fig. 3 the traveler has turned east on his new
course and is heading straight for Wpt 2, which is 2.37 miles away. Fig.
4 shows route navigation on the Map Page. In this figure, the traveler
has reached Wpt 2 and is half-way along the leg between Wpts 2 and 3.

Trails

Delete a Trail

This is the
Press |
MENU
|
D T ENT
ELETE RAIL
Tip:
You can also delete all trails at once:
1. Press
MENU
2. Press → to
Figure 1.
Figure 3.
command
|↓ to
MENU M
|← to |
Y
ES
| |↓ to
MENU
D A
ELETE LL
used to
|
T ENT
Y RAILS
.
ENT
|
M T ENT
Y RAILS
| |← to
ENT Y
ES
61
Figure 2.
Figure 4.
erase or delete
|↓ to trail name|
.
| .
ENT
a trail:
|→ to
ENT