Ground Wire; Push Buttons - TRENDnet TPE-420E User Manual

TRENDnet User's Guide
EU Power plug
with grounding
wire (EU)
UK Power plug
(UK)
© Copyright 2015 TRENDnet. All Rights Reserved.
Power plug (US)
Plug directly into an
available power
outlet. Not on a
power strip.

Ground Wire

TPL-420E using all 3 power wires to boost up
the Powerline communication speed to
gigabit. Please use 3 wire sockets and make
sure your electric system installed with all
load, natural and ground 3 wires.

Push Buttons

Button Action
Reset Push for 1
second
Sync Push for 15
seconds until all
LEDs goes off
Sync Push for 2
seconds
Power Save Mode: The Powerline adapter will automatically going into
standby mode to reduce power usage when there is no network traffic for
more than 10~20 minutes. All LEDs are going off.
It can be wake up automatically when the network traffic is coming again.
It takes a couple seconds to wake up and resume back to full speed of
service.
TPL-420E/TPL-420E2K
Important !!
Function
Reset device settings to factory defaults
(All LEDs will turn off and turn back on).
It will reset to the factory default private
network name "HomePlug AV".
Generate a new random network name
and encryption key (All LEDs will turn
off and turn back on).
Start a synchronization session. The
POWER LED will start blink for 2
minutes. Start the synchronization
session on another power adapter
within the time to synchronize the
network name and exchange the
encryption keys.
7