Contents Features ..............2 Locking a Channel ..........15 Managing Stations: Favourites ......15 Introduction ............. 2 Button Functions ..........16 Preparation ............. 2 Managing Stations: Sorting Channel List ..... 16 Safety Precautions ..........3 On-Screen Information ......... 16 Connection to a Television Distribution Media Playback Using Media Browser ....
Introduction Features • Remote controlled colour LCD TV. Please read the corresponding instructions of this handbook prior to the fi rst usage of the device, even • Fully integrated Terrestrial digital TV (DVB-T - when the usage of electronic devices is familiar MPEG2) (DVB-T - MPEG4).
Safety Precautions Lightning In case of storm and lightning or when Read the following recommended safety going on holiday, disconnect the power precautions carefully for your safety. cord from the wall outlet. Power Source Replacement Parts The TV set should be operated only from a 220-240V When replacement parts are required, make sure that AC, 50Hz outlet.
LCD Screen Connection to a Television Distribution System (Cable TV etc.) from Tuner The LCD panel is a very high technology product with about a million thin fi lm transistors, giving you fi ne Device connected to the protective earthing of the picture details.
Environmental Information • This television is designed to consume less energy to save environment. You not only help to save the environment but also you can save money by reducing electricity bills thanks to the energy effi ciency feauture of this TV. To reduce energy consumption, you should take the following steps: •...
Remote Control Buttons Standby Mono/Stereo - Dual I-II / Currrent Language (*) (in DVB channels) Image size / Zooms videos (in Media Browser video mode) Green buttonList Schedule(in EPG)/Tag/Untag All(in favourite list)/Play-Slideshow(in Media Browser) Red button/Stop(in Media Browser) Numeric buttons Teletext / Mix(in TXT mode) Cursor Left Menu on-off...
LCD TV and Operating Buttons FRONT and REAR VIEW Control buttons VIEW Control Buttons 1. Standby/On button 2. TV/AV button 3. Programme Up/Down buttons 4. Volume Up/Down buttons Note: Press “ ” and buttons at the same time to view main menu.
S/PDIF Coaxial Out outputs digital audio signals of the currently watched source. Use an SPDIF coaxial cable to trasfer audio signals to a device that has S/PDIF input RF Input connects to an aerial antenna system. Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device to the television with an appropriate antenna cable, as shown in the illustration in the following pages.
Using Digital Multimedia Connecting the LCD TV to a PC Connectors For displaying your computer’s screen image on your LCD TV, you can connect your computer to the TV set. • You can connect USB devices to your TV by using Power off both computer and display before making the USB inputs of the TV.
Connecting to a DVD Player Using Other Connectors If you want to connect a DVD player to your LCD You can connect a range of optional equipment TV, you can use connectors of the TV set. DVD to your LCD TV. Possible connections are shown players may have different connectors.
Input Selection • Press the “ ” or -P/CH, P/CH+ button on the TV. • The TV will then switch on. Once you have connected external systems to your TV, you can switch to different input sources. Note: If you switch on your TV via standby button on the remote control, the programme/source that “SOURCE”...
Programme Selection (Previous or Next Programme) • Press “ P-” button to select the previous programme. • Press “ P+” button to select the next programme. Programme Selection (Direct Access) • Press numeric buttons on the remote control to select programmes between 0 and 9.
guide database in accordance with the genre. Info available in the programme guide will be searched and results matching your criteria will be listed. (Now) : Shows the current programme. First Time Installation To select the “Yes” or “No” option, highlight the item by IMPORTANT: Ensure that the aerial is connected using “...
Digital Manual Search Auto Tuning HINT: Auto tuning feature will help you to retune the TV set in order to store new services or stations. Press “MENU” button on the remote control and select Installation by using “ ” or “ ” button. Press OK button and the following menu screen will be displayed.
will be displayed. Select Yes if you want to move the channel and press OK. • Press OK button to process. Selected channel is now moved. Deleting a Channel You can press GREEN button to tag/untag all channels; YELLOW button to tag/untag channel. Press OK to cancel.
of the channel is displayed, along with its channel list number. Hint: Not all channels broadcast the programme data. If the name and time of the programme are not available, then information banner will be displayed with blanks. If the selected channel is locked, you must enter the correct four-digit numeric code to view the channel (default code is 0000).
Viewing Videos via USB Viewing Photos via USB When you select Photos from the main options, available image fi les will be fi ltered and listed on this screen. When you select Videos from the main options, available video fi les will be fi ltered and listed on this screen.
Playing Music via USB Slide Show Interval: Sets slide show interval time. Show Subtitle: Sets subtitle enabling preference. When you select Music from the main options, available audio fi les will be fi ltered and listed on this Subtitle Language: Sets supported subtitle screen.
Note: You can shift to screen up or down by pressing “ ” / “ ” buttons while picture zoom is selected as panaromic, 14:9 Zoom, Cinema or Subtitle. 14:9 This zooms up the wide picture (14:9 aspect ratio) to the upper and lower limits of the screen.
Noise Reduction: If the broadcast signal is weak and Confi guring Sound Settings the picture is noisy, use Noise Reduction setting to Sound settings can be confi gured according to your reduce the noise amount. Noise Reduction can be set personal preferences.
(For instance, volume level of advertisements tend to Using a Conditional Access be louder than programmes). Module Dynamic Bass: Dynamic Bass is used to increase bass effect of the TV set. IMPORTANT: Insert or remove the CI module only when the TV is SWITCHED OFF. Surround Mode: Surround mode can be change as On or Off.
Language Settings Confi guring Language Preferences You can operate the TV’s language settings using this menu. Press “MENU” button and select the Settings icon by using “ ” or “ ” button. Press OK button to view Settings menu. Use “ ” or “ ” button to highlight Language and press OK to continue: In the confi...
Setting Programme Timers You can set programme timers for a particular programme using this feature. Press “ ” button to set timers on an event. Programme timer function buttons will be displayed on the screen. Adding a Timer • Press YELLOW button on the remote control to add a timer.
• Use “ ” or “ ” buttons to highlight Date/Time. Confi guring Other Settings Date,Time,Time Settings Mode and Time Zone Setting To view general confi guration preferences, select will be available. Other Settings in the Settings menu and press OK Use “...
You can enable or disable automatic upgrade by Other Features setting Automatic Scanning option. Displaying TV Information: Programme Number, You can manually search for new software by Programme Name, Sound Indicator, time, teletext, selecting Scan for upgrade. channel type and resolution information is displayed Hard of Hearing: If the broadcaster enables any on the screen when a new programme is entered or special signal concerning the audio, you can set this...
Teletext Tips Teletext system transmits information such as news, Screen Care: Clean the screen with a slightly damp, sports and weather on your TV. Note that is the signal soft cloth. Do not use abrasive solvents as they may degrades, for example in poor/adverse weather damage the coating layer of the TV screen.
Appendix A: PC Input Typical Appendix B: AV and HDMI Signal Display Modes Compatibility (Input Signal Types) The display has a maximum resolution of 1360 x 768. Source Supported Signals Available The following table is an illustration of some of the typical video display modes.
Appendix C: Supported DVI Resolutions When connecting devices to your TV’s connectors by using DVI converter cables (not supplied), you can refer to the following resolution information. 24Hz 25Hz 30Hz 50Hz 60Hz 480i 480p 576i 576p 720p 1080i 1080p Appendix D: Supported File Formats for USB Mode Supported Players Player Stream...
Appendix E: Software Upgrade • Your TV is capable of fi nding and updating new software upgrades over broadcast channels. • For broadcast channels search, TV looks the available channels stored in your settings. So before software upgrade search, it is advised to auto search and update all available channels. 1) Software upgrade search via user interface •...
Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply. MAINS (AC) OPERATION The wires in the mains lead are coloured in accordance with the following code : GREEN FUSE &...