Checking And Replacing The Wear Guard; Inspections And Maintenance By Dealer - Stihl FC 56 C Instruction Manual

Checking and Replacing the
Wear Guard
Checking the protection against wear
1
2
Before starting up the machine,
N
check that the protection against
wear (1) is not damaged
Replace the protection against wear
N
at the latest when the gearbox (2)
becomes visible (arrow)
NOTICE
If worn deflectors are not replaced in
time, this can cause serious damage to
the gearbox.
FC 56 C
Replacing the protection against wear
4
5
Remove the blade – see "Fitting the
N
blade"
Unscrew screws (4)
N
Replace the protection against
N
wear (5)
Screw in and tighten screws (4)
N
Fit the blade – see "Fitting the
N
blade"
Inspections and Maintenance
by Dealer
Spark arresting screen in muffler
If the engine is down on power,
N
check the spark arresting screen in
the muffler.
4
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer.
English
27