Lopi Revere Owner's Manual page 32

Top
Panel
a
Install the top panel so the
two tabs insert into the joggle
clips on the top panel
Top Trim
"L" Bracket
Double-Back
Tape
Tighten the set screws from the
b
back side with a small standard
screwdriver
Top Trim
"L" Bracket
Right Side
Trim
Right
Side Construct the panel trim. Insert one leg of
Trim each "L" bracket into the top and side trim
piece. Align the trim to form a precise corner,
then tighten the two set screws with a small
standard screwdriver. Slide the trim over the
panels. Attach a piece of included double-
back tape to the bottom of each side trim to
keep it from flaring at the bottom.