Surround Panels
NOTE
SURROUND PANEL SIZE
Installation Instructions
Insulation Installation
(required only for face seal
installations)
Optional Equipment
HEIGHT
a
Place two U-Nuts (included
with the insert) over the inside
flange on one of the side
surround panels (flat side in).
Back Side
of Side
Surround
Panel
The flat side
faces inwards.
WIDTH
PART #
Stove Top
b
Rotate the panel back
and place it so the inside
flange fits inside the side
convection jacket. Note
how the stove top fits
into the notch.
Notch
c
Attach the side panels with the two screws
included with the insert. The screws pass
through the side convection jacket and
attach to the U-Nuts. Do not tighten the
screws fully until the panels are aligned.
31
Top of Insert
Side
Convection
Jacket