LogTag Analyzer Temperature Recorder User Manual page 98

98 LogTag Analyzer User Guide (2.0)
Advanced settings Press this button to display a new dialogue
Attach file in the
following formats
As a minimum you only need to provide an SMTP server address and one recipient e-mail
address for this function to work.
Every time you make changes to these settings you should perform a test by pressing the
"Send Test e-mail" button. LogTag Analyzer will
check you have provided valid connection data,

send a test e-mail to the e-mail addresses in the recipient list.

If any of these actions fail, LogTag Analyzer will display one of the following error
messages:
In this case the SMTP server requires authentication, and the data provided were not
correct. Please enter the correct authentication data.
window where you can enter advanced
SMTP settings like port numbers, retries
and log files. Refer to the section about
Advanced SMTP settings
Select all files that you wish to attach when
the e-mail is sent. Each file ticked here will
be created, regardless of the settings
made in "EDIT - OPTIONS - EXPORTS AND
REPORTS".
(on page 99).