LogTag Analyzer Temperature Recorder User Manual page 104

104 LogTag Analyzer User Guide (2.0)
Field
Port Number
Security Protocol
Firewall/Proxy Settings
Retry
Maximum Retries
Automatic Disconnect if
idle
Log uploads
Log Connection errors
Click OK to store the settings or cancel to abort. You can restore default settings by
clicking on "Restore defaults".
What to enter
The default port for providing FTP connections is 21. Some network
administrators change the port number on their FTP servers to
increase security and stop hacking attacks. If your network
administrator has advised a different port for connection, please
enter it here.
In this case you may also need to change the settings of you
firewall.
If you wish to learn more about this topic please see any of the
published articles on networking and TCP/IP available on the
Internet.
Choose between none, SSL or TSL 1.0
Use the settings from the registry or choose your own settings.
Please discuss these settings with your network or IT administrator.
If a connection cannot be established, LogTag Analyzer will retry
the file upload after the number of minutes entered here. This
helps eliminate upload errors due to intermittent Internet
connection errors.
Enter the number of times LogTag Analyzer should try to upload
the file if previous attempts have not been successful.
LogTag Analyzer will keep the connection to the FTP server active,
even if currently no files are being uploaded. This avoids having to
exchange password and login information every time a file is
uploaded therefore providing faster uploads, especially if only a
slow Internet connection is available. After a certain amount of
inactivity the connection is dropped to save resources. Enter the
time after which you wish LogTag Analyzer to automatically
disconnect from the FTP server.
If a tick is placed in the box next to "Log uploads" the message
exchange between the FTP server and LogTag Analyzer is recorded
into a file. These files are automatically named "YYYY_M_D_LogTag
Analyzer_FTP.log", you can specify a location where the files are
created, or click
Tick this box if you wish connection errors to be logged. This is
recommended if you frequently experience upload errors and you
wish to discuss this issue with your network administrator.
to browse to a location of your choice..